Horse Farm Fence Painting and Staining in Newberry, FL

Board Fencing on Newberry Farms

Head out past the West End of town and the landscape turns to pastures, small horse farms and family acreage, much of it lined with three- and four-board wood fence. Fence painting in Newberry, FL on these properties is about protecting a working fence that has to stay safe for animals while looking sharp from the road.

Since Newberry is our home base, farm fence work here is easy for us to schedule in phases, around weather and around your animals' routine.

Black, White or Natural

Horse-country fences tend to fall into three looks. Classic black is popular because it hides weathering and blends into the landscape. White looks crisp but shows dirt and needs more frequent upkeep. A natural or toned stain keeps the wood look and is easiest to refresh.

Each has trade-offs in how often you will recoat and how visible wear becomes. We go through them during a walk of the fence line.

Chewing, Rubbing and Leaning

Horses are hard on fences. They chew the top board, scratch against posts and lean over to reach grass on the other side. Chewed and splintered boards should be replaced or repaired before coating, since a fresh finish on a gnawed rail will not last and splinters are a safety concern.

When choosing a horse fence stain or paint, it makes sense to ask about safety around animals. We discuss product types with you and recommend letting coatings dry and cure before horses go back into a freshly coated paddock. Ask your veterinarian if you have concerns about a specific animal.

How We Coat a Long Four-Board Line

Dust from unpaved drives and rural roads settles on fences constantly. If it is not cleaned off, it sits under the coating and weakens adhesion, so washing is always part of our prep. Our pressure washing in Newberry can handle barns and outbuildings at the same time.

• Walk the line and flag broken, chewed or loose boards for repair
• Clean off mildew, dirt and lime-rock dust from the road side
• Spray to move material quickly along open runs, then back-brush
• Give posts, cut tops and board ends extra coating
• Keep gates working and pastures rotated so animals have room during the job

Mowing Lines and Fence Bottoms

String trimmers and mowers scuff the bottom board and the base of each post. Those areas wear through first. Keeping vegetation trimmed cleanly and touching up the bottom board between full recoats adds years to the job. For the full background on stains and Florida wood, see our deck and fence staining page.